MSK101C-0300-NN-M2-AG0-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326051
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
44 Seconds
The Bosch Rexroth Indramat MSK101C-0300-NN-M2-AG0-RNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features a plain shaft, natural convection cooling, and a protection rating of IP65. The motor has an optical EnDat2.1 multiturn absolute encoder with a resolution of 2048 signal periods and operates in ambient temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101C-0300-NN-M2-AG0-RNNN is a servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It drives precision axes in packaging lines, machine tools, and handling systems where tight position control and rapid torque response are required. Integrated with IndraDrive controllers, the motor converts electrical power into regulated rotational motion that follows commands issued by the automation system. This arrangement suits synchronized motion tasks that require repeatable acceleration, stable speed control, and accurate stopping at programmed positions.
The unit relies on natural convection for heat removal, so installation layouts must allow vertical airflow around the housing. Position feedback is delivered through the EnDat2.1 serial interface, and its optical scanning system resolves rotor angle into 2048 signal periods per mechanical revolution. Multiturn tracking is supported because the encoder stores revolution counts as a multiturn absolute value, eliminating homing after power cycles. With the power connector oriented on the A-side, installation can follow conventional cable routing, and the drive is coupled by a plain shaft that supports direct clamping with suitable hubs or couplings. The C-length housing balances inertia and continuous torque for mid-frame applications.
An enclosure rating of IP65 protects internal components from dust and water jets, and the motor is intended for ambient conditions of 0–40°C. The stator winding uses insulation class 155, allowing elevated winding temperatures during cyclic loading. Code 0300 identifies the electromagnetic winding variant and matches the current, voltage, and torque values expected by the associated IndraDrive inverter. The 101 frame size sets the mechanical footprint, and the design with increased concentricity reduces radial runout at the coupling. The motor is supplied without a holding brake, so stationary loads must be secured by external clamping or drive-generated torque when power is removed.
Frequently Asked Questions about MSK101C-0300-NN-M2-AG0-RNNN:
Q: What encoder interface does the MSK101C-0300-NN-M2-AG0-RNNN motor feature?
A: The MSK101C-0300-NN-M2-AG0-RNNN servo motor utilizes an EnDat2.1 encoder interface for digital position feedback.
Q: What is the protection rating of the MSK101C-0300-NN-M2-AG0-RNNN servo motor?
A: This model has a protection rating of IP65, providing complete protection against dust and low-pressure water jets.
Q: How is the MSK101C-0300-NN-M2-AG0-RNNN servo motor cooled?
A: The MSK101C-0300-NN-M2-AG0-RNNN operates using natural convection cooling and does not require forced air or liquid cooling.
Q: What shaft configuration is present on the MSK101C-0300-NN-M2-AG0-RNNN?
A: The shaft type for this motor is plain, allowing direct coupling in applications where a keyway or special fitting is not required.
Q: Is a holding brake included with the MSK101C-0300-NN-M2-AG0-RNNN motor?
A: The MSK101C-0300-NN-M2-AG0-RNNN does not have a holding brake installed.
