Product Description:

The MSK101C-0300-NN-M1-AP2-NNNN is an IndraDyn S synchronous servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Acting as the primary mover in servo axes, it converts drive current into controlled rotary motion for coordinated movement in automated assembly lines, printing presses, and material-handling stations. Integrated feedback lets the connected controller track rotor position continuously, which supports accurate speed regulation and repeatable positioning during changing loads. This arrangement supports closed-loop axis control where accurate acceleration and settling behavior are required.

The motor is assigned cooling class FN and relies on natural convection, so heat is removed through the housing without an external blower. An electrically released brake provides 70 Nm of static holding torque to prevent unwanted shaft rotation during power-off states or safety stops. Feedback is supplied by an optical encoder with 128 signal periods per revolution, supporting fine interpolation in the drive. The housing has an IP65 rating, which helps keep dust and water jets away from internal components. The winding uses class 155 insulation for the required thermal endurance.

Interface wiring uses an A-side power connector, while the signal channel communicates over Hiperface for position transfer and electronic motor data exchange. The encoder is a multi-turn absolute type, so the controller can retain absolute position information after the supply is restored. Continuous operation is specified within an ambient range of 0 to 40 °C, which suits enclosed industrial machine spaces with controlled air conditions. Mechanical output is delivered through a shaft with keyway for positive torque transmission to couplings, gears, or pulleys. The motor also uses the standard design code with size 101, length C, and winding code 0300, placing it within the correct mechanical and electrical configuration for this model range.