Product Description:

The MSK101C-0300-NN-M1-AP0-NNNN is a synchronous servo motor built by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts controlled electrical input into precise rotary motion for position and speed control on automated axes used in packaging equipment, handling robots, and machining centers. Its mechanical layout suits IndraDrive-based motion systems and allows direct installation on articulated joints or linear stages where accurate feedback and efficient operation are required. The motor is intended for applications that need repeatable motion, stable dynamic response, and compact integration with servo drive hardware.

Thermal management for this motor relies on natural convection, allowing heat to dissipate through the housing without forced air or liquid cooling. The enclosure is sealed to IP65, which helps protect internal parts from dust and water jets during normal machine operation. Rated service is maintained in ambient conditions from 0–40 °C, making the motor suitable for common industrial environments. The motor has a frame size of Motor Size 101, and the C length provides a longer active section for higher continuous torque within the same mounting pattern. It is supplied without a holding brake, so any load that must remain fixed at standstill requires external holding force or drive-applied torque.

Signal transmission is handled through the Hiperface interface, and the optical feedback system provides 128 signal periods per mechanical revolution while retaining absolute position information over multiple turns. Because the feedback is multiturn, the axis can return to operation after a power cycle without a homing move in many machine layouts. The winding insulation is in thermal class 155, which supports continuous duty at elevated internal temperatures. Power leads exit on the A-side connector, and a keyed shaft transfers torque directly to the driven coupling. The motor uses winding code 0300, which matches the electrical characteristics expected by the corresponding drive controller.