MSK101C-0200-NN-S1-LG0-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385652
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK101C-0200-NN-S1-LG0-NNNN synchronous servomotor produced by Bosch Rexroth supports an encoder with 128 signal periods. This servomotor portrays a torque constant of 2.37 Nm/A. Its power connector is oriented to the left side. The motor has a total mass of 28.3 kg and an overall length of 349 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101C-0200-NN-S1-LG0-NNNN synchronous servomotor by Bosch Rexroth cannot be made to operate with drive controllers from other manufacturers. This servomotor has to be lifted using a crane equipped with loop lifting straps. The product can be worked on only after covering or shielding its adjacent live parts. This device is likely to cause injury due to improper handling during its transportation. The unit installation, operation as well as maintenance must be undertaken only by specialist personnel. Its bolted connections for flange mounting should be able to withstand the motor weight. This motor mounting can be executed only after keeping the required tools as well as testing and measuring equipment handy.
The product is to be mounted only on a flange that is free of burs. This device comes equipped with four pole pairs. The unit has its electrical connector directed to the left side. It uses circular connectors for the electrical connection. This motor has separate flange sockets for the power and encoder connections. The product triggers the risk of explosion hazards because of improper handling during its connection. This device connection is not to be established using damaged cables. The unit requires a connection with a separate potential equalization line that has a cross-section of at least 4mm2. This servomotor comprises a one-year warranty tag.
The product portrays reduced performance if the ambient conditions are exceeded. It features a 3K4 climatic category for its permanent use during its operation period. This motor supports a maximum allowed axial shock load of 100m/s2 for 11ms. The product has an IP 65 degree of protection in compliance with EN 60034-5 specifications for its shaft as well as housing. This device installation in vertical orientation must be done with the shaft facing upward. It is necessary to take care that the loop lifting strap used to lift the motor is not wound around the shaft. This servomotor is transported through reputed freight carriers with a worldwide presence.
