Product Description:

The MSK101C-0200-NN-S1-BG0-NNNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts electrical drive commands into precise mechanical rotation for controlled axis movement in automated equipment. This makes it suitable for positioning axes, pick-and-place gantries, and other motion tasks that require accurate speed and position control.

This motor relies on natural convection for heat dissipation, so airflow around the housing must remain unobstructed during installation. Rotor position is reported through a Hiperface optical encoder that delivers 128 signal periods per revolution. Combined with its optical scanning principle, this feedback supports fine speed regulation and stable position tracking. The encoder is a single-turn device, so it tracks one full revolution and requires external system support for multi-turn position counting. With a frame size of 101, the motor provides a balance of torque output and inertia for mid-range drive applications. The motor is supplied without a holding brake, so load retention after power removal must be handled by external mechanics or by the drive. The winding code 0200 identifies the electrical characteristics used with matching MSK drive configurations.

The enclosure carries an IP65 rating, which helps protect internal components from dust and low-pressure water jets in typical factory settings. A plain shaft provides a smooth interface for backlash-free couplings, and the power connector is located on the B-side to support orderly cable routing along the machine frame. Continuous operation is permitted at ambient temperatures from 0–40 °C. The insulation system meets class 155 requirements, allowing winding temperatures up to 155 °C without degradation during normal operating conditions. Motor length code C is used for the stack height associated with its nominal torque range.