Product Description:

The MSK101C-0200-NN-S1-AP0-NNNN is a servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. In automated machinery, the unit converts drive commands from the controller into precise rotation at the load side, allowing tight position and torque regulation for packaging lines, pick-and-place gantries, and metal-cutting axes. This makes it suitable for closed-loop servo applications that require accurate motion during repeated start-and-stop cycles. Its housing and flange dimensions follow the common MSK pattern, which helps it fit established machine layouts and familiar coupling arrangements.

Its thermal design relies on natural convection, so heat is shed through the housing without auxiliary fans or liquid circuits. Position feedback is supplied by a Hiperface interface that transmits data from an optical measuring system. That sensor delivers 128 signal periods per revolution, giving the controller fine motor angle resolution during interpolation. Because the encoder is a single-turn device, absolute position is retained within one mechanical turn, while the drive tracks extended rotation as needed. The motor is delivered without a holding brake, so external locking or continuous drive torque must maintain load position when power is removed.

The motor has length C and frame size 101, a combination that balances torque output with compact depth for cabinet or spindle mounting. Torsional force is transmitted through a shaft with keyway, which supports direct connection to pulleys, couplings, or gearboxes. A keyed shaft is useful where positive torque transfer is preferred over friction-only clamping. Power leads exit on the A-side of the stator housing, helping cable routing stay consistent with adjacent machine components. The winding code 0200 corresponds to electrical values used with standard IndraDrive power stages.