Product Description:

The MSK101C-0200-NN-S1-AG0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts electrical energy from a compatible drive into precise rotary motion for machine tools, packaging stations, and material-handling axes that require accurate speed and position control. Its operating role is to convert commanded current into controlled torque and speed so the connected axis can follow programmed motion profiles during indexing, transfer, and positioning tasks. The motor uses an integrated feedback device for closed-loop operation and delivers mechanical output through a direct shaft connection, making it suitable for coupling to gearboxes or driven shafts in automated equipment.

Thermal management relies on natural convection, so heat is dissipated through the housing without forced airflow or liquid cooling. Position feedback is transmitted through a Hiperface interface, and the encoder provides 128 signal periods per mechanical revolution. The feedback system uses optical scanning, which offers high immunity to magnetic interference while supporting single-turn absolute position detection within one revolution. The 0200 winding code suits medium-torque applications, and the motor is supplied without a holding brake, so power-off load retention must be provided externally when required.

The mechanical format uses a C-length housing in the 101 frame, giving a balanced ratio of inertia to torque for medium-duty axes. Power cabling enters on the A-side, which helps separate motor leads from feedback wiring and reduce crosstalk in compact machine layouts. Torque is transmitted through a plain shaft without a keyway, favoring clamp or shrink-fit couplings for low-backlash assembly. This shaft style is commonly used where backlash-free couplings are preferred over keyed hubs. The motor has a standard design, so no special coatings or reinforced seals are included.