Product Description:

The MSK101C-0200-NN-M1-LK0-NV02 belongs to the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. It is an AC servomotor intended for closed-loop positioning and velocity tasks in industrial automation lines, where precise torque delivery and encoder feedback are required for coordinated multi-axis motion. This motor is suited to applications that need stable speed regulation and accurate position tracking during repeated machine cycles.

This model dissipates heat through natural convection, so airflow around the housing must be maintained instead of using external blowers. Position data are delivered through the Hiperface interface, allowing commutation information and absolute angle values to be transferred on the same two-wire channel. Inside the encoder, an optical scanning head reads a code disk divided into 128 signal periods, and that signal structure supports fine interpolation in the drive controller. Because the sensing system is a multi-turn absolute type, it tracks shaft position across multiple revolutions without requiring a homing routine after power cycling. The C motor length provides room for the active winding while keeping the housing shorter than longer versions in the same frame family.

No mechanical holding force is provided because the motor is supplied without a holding brake, so position retention during power-off must come from an external device or continuous servo torque. Power enters through a left-side connector, which affects cable routing when several axes are installed close together in the same enclosure. The stator uses winding code 0200, which sets the electrical characteristics expected by a compatible IndraDrive amplifier. Frame designation 101 determines the mounting size and shaft height, helping the motor fit the intended machine interface. This combination of cooling, feedback, and connection layout supports controlled operation on medium-inertia servo axes.