Product Description:

The MSK101C-0200-NN-M1-BK0-NV02 is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat and grouped within the MSK IndraDyn S Synchronous Motors series. The model serves as a precision actuator that couples directly to machine shafts, supplying closed-loop torque and speed control for conveyor lines, printing registers, and pick-and-place heads in automated factories. By integrating a high-resolution encoder and carefully matched windings, the motor supports coordinated multi-axis motion in modern CNC and PLC environments.

Heat removal relies on natural convection, so auxiliary fans are unnecessary and cabinet complexity stays low. Position data leaves the housing through the Hiperface interface, a bidirectional serial link that carries both feedback signals and sensor power. Inside the encoder, an optical scanning system produces 128 signal periods per mechanical revolution, and internal interpolation supports fine velocity loops. Because the system is multiturn absolute, it tracks shaft position across 4096 turns, eliminating homing routines after power is restored. The winding temperature and inertia are matched to mid-range drives, and the stator body helps keep vibration within limits for precision servo axes.

The motor has a frame size of 101 and a motor length of C, which keep the overall stack height moderate on linear slides. Coil set code 0200 indicates the electrical resistance and inductance expected by IndraDrive amplifiers, allowing rated torque without derating. Power cabling exits on the B-side, which separates high-current conductors from the feedback connector for easier electromagnetic compatibility. The motor is supplied without a holding brake, so external clamping is required when static load support is needed. This omission lowers rotational inertia and improves responsiveness for horizontal or counterbalanced axes.