MSK101C-0200-NN-M1-AP2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911347233
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
14 Seconds
The Bosch Rexroth Indramat MSK101C-0200-NN-M1-AP2-NNNN is part of the MSK IndraDyn S Synchronous Motors series and features natural convection cooling with IP65 protection rating. This standard servomotor comes with a shaft with keyway, Hiperface optical multiturn absolute encoder, and has a holding brake torque of 70 Nm. It supports an operating ambient temperature range of 0 to 40°C and uses an A-Side power connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101C-0200-NN-M1-AP2-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. With motor size 101 and a C-length housing, this standard-design unit supplies rotary power for precision axes in packaging, printing, and assembly lines where closed-loop speed and position control are required. Its construction combines a permanent-magnet rotor with an integrated feedback system, allowing the drive controller to regulate torque accurately during dynamic industrial automation cycles. It is well suited to indexing tables, feed axes, and transfer mechanisms that cycle repeatedly through acceleration, dwell, and deceleration.
Thermal management relies on natural convection, so the mounting position must leave the finned housing open to ambient air. An electrically released holding brake delivers 70 Nm of static torque to secure vertical loads when power is removed. Position data pass through the Hiperface interface, and the optical feedback system produces 128 signal periods per revolution for the drive. A power connector on the A-side helps simplify cable routing in compact machine layouts, while winding code 0200 matches the stator to suitable MSK drive modules. The sealed housing carries an IP65 rating that blocks dust ingress and low-pressure water jets.
The optical feedback is a multi-turn absolute system, so the controller receives position information after shutdown without requiring a homing routine at startup. Torque is transferred through a shaft with keyway, which supports direct coupling to pulleys, couplings, and gearheads. Continuous operation is specified for surrounding air between 0-40 °C, aligning with typical industrial installation conditions. The windings use insulation to class 155, allowing elevated internal temperatures without dielectric breakdown during extended duty. This arrangement supports repeatable motion on axes that must hold position at rest and resume controlled movement after power returns.
Frequently Asked Questions about MSK101C-0200-NN-M1-AP2-NNNN:
Q: What type of encoder and interface does the MSK101C-0200-NN-M1-AP2-NNNN motor use?
A: The MSK101C-0200-NN-M1-AP2-NNNN motor is equipped with a multiturn absolute optical encoder with Hiperface interface.
Q: What shaft type is offered on the MSK101C-0200-NN-M1-AP2-NNNN?
A: This motor features a shaft with keyway for secure mechanical coupling.
Q: Does the MSK101C-0200-NN-M1-AP2-NNNN have a holding brake and what torque does it provide?
A: A holding brake with 70 Nm of brake torque is included and it is electrically released.
Q: What cooling method is required for the MSK101C-0200-NN-M1-AP2-NNNN?
A: The MSK101C-0200-NN-M1-AP2-NNNN operates with natural convection and requires Cooling FN.
Q: What is the protection rating of the MSK101C-0200-NN-M1-AP2-NNNN motor?
A: This model has a protection rating of IP65, making it resistant to dust and low-pressure water jets.
