Product Description:

The MSK101C-0200-NN-M1-AK0-NV02 is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat and part of the MSK IndraDyn S Synchronous Motors series. It delivers precise position and speed control when coupled to Rexroth drive regulators, supplying regulated torque to automated axes that need fast feedback and repeatable motion. With a stator diameter classified as size 101 and length code C, the unit fits medium-to-high-power duties in packaging lines, gantry stages, and material-transfer modules. Its operating profile suits servo applications that require consistent response during indexing, transfer, and other repeated motion sequences.

Heat removal depends on natural convection, so airflow around the housing must remain unobstructed. Position data travel through a Hiperface interface, assisted by the encoder’s 128 signal periods per revolution for low-ripple speed loops. The sensing element is optical and uses multi-turn absolute feedback, so position is retained across power cycles without drift. This feedback arrangement allows immediate position availability after power-up and supports stable control at low and changing speeds. The motor is supplied without a holding brake, so external locking or drive torque must secure loads at rest.

The motor has IP65 sealing that blocks dust and low-pressure water jets, so it can mount directly on moving axes. Electrical power enters through the A-side connector, which can simplify cable routing where installation space is limited. The 0200 winding pairs with IndraDrive amplifiers, and thermal rise remains within insulation class 155. Continuous duty is permitted from 0 to 40 °C, and operation outside this range reduces available thermal margin because cooling relies on ambient airflow. Because heat is carried away through the motor surface rather than forced ventilation, free space around the housing is important during installation.