Product Description:

The MSK101C-0200-NN-M1-AG0-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It uses the standard housing design for this motor family. The designation 101 identifies the frame size, while length code C indicates the third axial variant in the series. In industrial automation, this motor drives positioning axes and process lines that require precise torque and speed control when paired with a compatible servo drive.

Thermal management relies on natural convection, so heat generated by the stator is released through the housing without forced airflow. The stator windings use code 0200, which sets the electrical values expected by the matching drive. For feedback, the motor uses an optical encoder that reports position over a Hiperface serial link. Its encoder disk provides 128 signal periods per mechanical turn to support fine interpolation inside the drive. Because the feedback system is multiturn absolute, the motor retains revolution count information after power is removed and does not require a homing routine at every startup. Electrical power and protective earth are routed through the connector on the A-side of the end bell, and the motor is supplied without a holding brake.

The enclosure has an IP65 rating, which helps protect the windings and encoder from dust and low-pressure water jets. Continuous operation is permitted in an ambient temperature range of 0 to 40 °C without derating. A plain shaft transfers torque to couplings or pulleys without keyways, which can simplify assembly in low-backlash drive systems. The insulation class is 155, so the winding insulation system is suitable for temperatures up to 155 °C. These operating and mechanical features suit the motor to demanding shop-floor environments where accurate servo response and stable thermal performance are required.