Product Description:

The MSK101C-0200-FN-M1-BP0-NNNN is a synchronous servomotor built by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It provides precise torque and position control for industrial automation axes that require fast response and compact dimensions. The 101 frame size places the motor in a mid-range housing for this product family, while the C length indicates a longer active stack within the frame. Integration into motion systems is supported by a keyed output shaft and a side-mounted power connection that helps keep the installation compact.

The motor uses liquid cooling, which circulates coolant through an internal jacket to remove heat from the copper windings and magnets without depending on cabinet airflow. Feedback is provided by a Hiperface optical encoder that delivers 128 signal periods per mechanical revolution. In a multi-turn absolute configuration, the encoder retains absolute rotor position across power cycles. The housing is rated IP65, which helps protect internal components from dust and low-pressure water jets. The motor does not include a holding brake, so the load must be secured by external means when power is off. Its power connector is located on side B, which helps separate motor and feedback cabling during routing.

Continuous operation is permitted in ambient temperatures from 0 to 40 °C, which suits typical factory conditions. The output uses a shaft with a keyway for positive mechanical coupling during rapid acceleration and deceleration. Winding code 0200 identifies the electrical configuration used for this motor. The insulation system is rated to class 155, providing thermal capacity appropriate for the motor’s operating range. These characteristics support use in demanding servo applications where stable feedback, controlled cooling, and secure shaft coupling are required.