MSK100D-0350-NN-S1-BP2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911344277
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
55 Seconds
The Bosch Rexroth Indramat MSK100D-0350-NN-S1-BP2-NNNN is part of the MSK IndraDyn S Synchronous Motors series and features a motor size of 100 with a length D. This standard design servomotor uses natural convection cooling, a shaft with keyway, and includes an electrically-released holding brake with a torque of 70 Nm. It is equipped with an optical singleturn Hiperface encoder providing 128 signal periods.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100D-0350-NN-S1-BP2-NNNN is an IndraDyn S synchronous servomotor engineered by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. This motor converts electrical power into controlled mechanical torque and speed, allowing precise axis movement in packaging machines, gantry systems, and similar automation equipment. Tight coupling between rotor position feedback and drive electronics supports repeatable point-to-point positioning, while the compact housing allows direct mounting in machinery without additional subplates. The motor is intended for closed-loop servo applications where stable speed control and accurate stopping behavior are required during repetitive machine cycles. This operating style is well suited to indexing, synchronization, and repeated start-stop duty in automated equipment.
Heat generated by the stator is removed by natural convection, so the motor can operate in cabinets that lack forced ventilation. For feedback, a Hiperface interface carries both incremental and absolute data from the internal encoder. That encoder provides 128 signal periods per mechanical revolution, and it uses optical sensing for high signal quality in low-voltage environments. An electrically released holding brake is included, and it can clamp the shaft with 70 Nm of static torque when power is removed. This helps hold vertical axes at standstill and supports controlled stopping when the drive disables torque.
The feedback device is a single-turn encoder, so absolute position is reported within one full revolution and startup routines can remain simple. The motor has a D length and a 100 stator size, giving it a larger active section for steady continuous output. Winding code 0350 matches the motor’s electrical characteristics to compatible drive outputs for medium bus voltages. A power connector on the B-side helps cable routing, and the keyed shaft transmits torque without slip in coupled machinery. This arrangement supports direct integration with machine axes that need compact installation space and reliable holding at standstill.
Frequently Asked Questions about MSK100D-0350-NN-S1-BP2-NNNN:
Q: What type of cooling does the MSK100D-0350-NN-S1-BP2-NNNN servo motor utilize?
A: This model uses natural convection for cooling instead of forced air or liquid cooling.
Q: Does the MSK100D-0350-NN-S1-BP2-NNNN motor have a holding brake, and what is its torque rating?
A: The motor comes equipped with a holding brake that is electrically released and provides 70 Nm of torque.
Q: What encoder technology and interface are featured on the MSK100D-0350-NN-S1-BP2-NNNN?
A: An optical singleturn encoder with Hiperface interface and 128 signal periods is used on this model.
Q: What type of shaft does the MSK100D-0350-NN-S1-BP2-NNNN servo motor feature?
A: The MSK100D-0350-NN-S1-BP2-NNNN has a shaft with a keyway for secure mechanical coupling.
Q: Where is the power connector situated on the MSK100D-0350-NN-S1-BP2-NNNN motor?
A: The power connection for this motor is located on the B-Side of the unit.
