Product Description:

The MSK100D-0300-NN-M2-AG0-RSNN is an IndraDyn S synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Designed for precision positioning in pick-and-place arms, packaging axes, and other industrial automation equipment, it converts electrical power into regulated rotary motion while providing closed-loop feedback for accurate speed and torque control. The motor is suited for servo-driven applications that require repeatable starts, stops, and changes in speed. Its compact configuration supports installation where motion accuracy and stable dynamic response are both important.

Heat generated by the stator is removed through natural convection, eliminating fans or liquid lines and simplifying installation. Position and speed feedback travel over the EnDat2.1 serial link; this interface supports the optical sensor’s 2048 signal periods per mechanical turn and provides multiturn absolute position data. Winding code 0300 indicates the phase impedance used with the 100 mm frame so the matching drive can deliver rated torque within its thermal limits. Environmental sealing to IP65 helps keep out dust and low-pressure water jets, while the motor uses a plain shaft, motor length code D, and an A-side power connector for straightforward mechanical and cable layout.

The rotor is supplied without a holding brake, so vertical loads must be secured by external clamping or by controlled motor torque when power is removed. The motor is built for increased concentricity and explosion protection, which helps reduce runout and supports use in classified areas. Continuous duty is permitted within 0–40 °C ambient air, and the F-class winding insulation is rated to 155 °C for long thermal exposure. This temperature range suits typical indoor industrial environments where the motor runs for extended periods.