Product Description:

The MSK100D-0300-NN-M1-AP0-NNNN synchronous servomotor is manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts controlled drive current into precise rotary motion for positioning, indexing, and synchronized axis movement in automated equipment. This operating role makes it suitable for assembly lines and packaging cells where repeatable torque and stable velocity are required across frequent motion cycles. When paired with a compatible drive, the motor supports closed-loop motion control that helps the axis maintain commanded position and speed as operating loads change.

The motor has frame size 100 with length code D, giving it the housing size and active stack depth used for its torque class. Winding code 0300 identifies an electrical winding matched to IndraDrive amplifiers. Cooling is handled by natural convection, so heat leaves the housing without external fans. A standard design housing resists typical plant contaminants, and the motor is supplied without a holding brake, so external load holding is required when the axis is at rest. Feedback passes through a Hiperface interface, and the encoder provides 128 signal periods per electrical revolution for controlled speed and position regulation.

An optical sensing method and a multiturn absolute track allow the controller to retain shaft position information over 4096 turns, which reduces the need for homing after power loss. The output shaft is a shaft with keyway, allowing direct coupling to pulleys or rigid couplings while helping prevent slip under load. Power cabling is routed through the A-side connector so the motor can be installed close to machine frames without sharply bending the mains conductors. This encoder arrangement also supports stable feedback during low-speed operation and repeated positioning tasks.