Product Description:

The MSK100D-0200-NN-S3-AP0-NNNN belongs to the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. This standard-design motor has size 100 and length code D, and it is intended for precision positioning and speed control in automated machinery, conveyors, and packaging axes. Its keyed shaft transfers torque to couplings or pulleys, while an A-side power connector helps keep cable routing straightforward inside machine enclosures. Because the motor does not include a holding brake, standstill holding must be provided by drive torque or an external mechanical device when the axis is stopped.

The unit relies on natural convection for heat dissipation, so the installation area must allow free airflow around the housing. Position feedback is provided through a Hiperface interface, which supplies digital data together with sin-cos signals for control and monitoring. The integrated encoder generates 16 signal periods per mechanical revolution, and its capacitive scanning principle resists magnetic interference that can affect optical feedback devices. Because the encoder is single-turn, it reports the absolute rotor angle within one mechanical revolution, so position across multiple turns must be tracked by the connected drive after power cycling.

The housing carries an IP65 protection rating, which helps keep dust and low-pressure water jets away from internal motor components during machine-mounted operation. Continuous operation is permitted in ambient temperatures from 0 to 40 °C, which matches common industrial indoor conditions without requiring external cooling hardware. The insulation system uses class 155 materials so the winding system can tolerate elevated internal temperatures during cyclic duty. Winding code 0200 identifies the stator electrical set used by the matching drive for current control, torque response, and stable operation over the intended speed range.