Product Description:

The MSK100D-0200-NN-S2-LP0-RSNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It supplies closed-loop electrical torque for positioning and speed control tasks in industrial automation. This allows motion axes in packaging, pick-and-place, and machining equipment to follow drive commands with high accuracy.

This model cools through natural convection, so the housing surface dissipates heat without auxiliary fans or liquid channels. Feedback signals are exchanged over the EnDat 2.1 serial interface, and the integrated optical encoder provides 2048 signal periods per revolution, giving fine incremental data for the drive controller. The device carries a protection rating of IP65, so its housing and seals resist dust ingress and low-pressure water jets on the factory floor. Operation is permitted in ambient air from 0 to 40 °C, matching standard cabinet and open-machine environments. The encoder is a single-turn optical type, so absolute position is retained over one revolution and restored after startup without homing. Explosion-protection construction and increased concentricity of rotating parts reduce ignition risk and mechanical runout.

A keyed coupling interface is provided by the shaft with keyway, simplifying torque transfer to pulleys or gearboxes. The winding code 0200 is used with the size 100 stator and the D build length, which increases active copper for higher continuous torque. Thermal endurance of the insulation system is class 155, allowing conductor temperatures up to 155 °C before degradation. The left-side power connector directs motor cabling toward the drive cabinet in side-mounted installations, and the unit is supplied without a holding brake, so external locking or static drive torque must secure the load when power is removed.