Product Description:

The MSK100D-0200-NN-S2-BG0-RNNN is a synchronous servomotor manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts electrical energy into controlled mechanical rotation for positioning stages, packaging stations, and gantry axes that demand tight velocity and position regulation. As an IndraDyn S synchronous servomotor, the unit integrates digital feedback so automated equipment maintains repeatable motion profiles under changing load conditions. This makes it suitable for synchronized motion tasks in automated production equipment. Its mechanical layout fits directly into modular machine frames for straightforward installation.

Thermal management relies on natural convection, eliminating external fans and allowing the motor to operate where housing surfaces can dissipate heat. Position data is transmitted through an EnDat2.1 interface, and this bidirectional link supplies absolute values to the drive while also allowing parameter exchange over a single cable. The feedback system uses an optical sensing element with 2048 signal periods per revolution, and it is single-turn so the absolute position resets after one full rotation. Winding code 0200 identifies the electrical configuration matched to compatible drive outputs at rated speed. The motor is supplied without a holding brake, so an external method is required to hold the load when power is removed.

The rotor and stator are machined for increased concentricity, which helps reduce radial runout and vibration during high-speed cycles. Frame size 100 sets the flange pattern, while length code D increases the active stack to support higher continuous torque without changing the cross-section. Power connections exit on the B-side, which can simplify routing on right-hand machine layouts. The motor uses a plain shaft for couplings or pulleys, making it suitable for keyless or shrink-fit connections.