Product Description:

The MSK100D-0200-NN-S1-BG0-NSNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. The unit is intended to drive industrial axes that demand precise velocity and torque control, allowing integration with Rexroth converters and multi-axis platforms in assembly lines, packaging stations, or material-handling cells. Its servo design supports repeatable positioning and stable speed regulation during indexing, transfer, and other automated motion tasks where load conditions can change from cycle to cycle.

Its frame uses motor size 100 with the D length to provide higher active stack height without exceeding common mounting footprints. Heat is removed through natural convection, so airflow around the housing is sufficient and no forced-air accessories are required. This cooling method keeps the motor exterior simple and supports installation on machine sections where auxiliary airflow is limited. The aluminum housing carries an IP65 enclosure rating, blocking dust ingress and water jets encountered in open machine environments. Position feedback comes from an Hiperface optical single-turn encoder that resolves 128 signal periods, giving the drive controller absolute rotor position after every power-up. Because the motor is supplied without a holding brake, external holding force or static servo torque must keep the axis at rest when required. The B-side power connector simplifies cable routing toward the cabinet and can help keep harness runs clear of nearby moving machine elements.

The winding set identified by 0200 is matched to drives that supply the rated current profile of the MSK100D variant, while insulation class 155 withstands internal copper temperatures associated with cyclic overloads. Operation is permitted between 0–40 °C, which aligns with common ambient conditions found in industrial electrical enclosures and machine-mounted installations. The motor uses a plain shaft, which presents no keyway and allows shrink-fit couplings with minimal runout. That shaft style is suited to direct connections where smooth torque transmission and accurate alignment are important for the driven axis.