Product Description:

The MSK100D-0200-NN-M2-LG0-RNNN is an AC synchronous servo motor supplied by Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. Within an automation cell, this motor converts drive-controller current into precise mechanical rotation for positioning and process control. It is well suited for applications that need accurate motion, such as pick-and-place axes or tooling spindles that benefit from direct feedback and tight speed regulation. The motor is intended for closed-loop operation, where the connected drive continuously corrects torque and speed as load conditions change.

Heat is removed through natural convection, so no external blower or liquid circuit is required, and the housing releases losses into the surrounding air. Rotor and stator components are machined for improved concentricity, which helps reduce mechanical runout during high-speed operation. Position data travel through the EnDat2.1 serial interface, and the optical scanning head delivers 2048 signal periods per revolution for precise feedback processing in the connected drive. Because the feedback system is multi-turn absolute, the motor retains position information across power cycles and does not require a reference move after startup. Sealing elements provide an IP65 enclosure rating that helps keep dust and water jets away from internal components.

A plain shaft lets users select clamping or friction-fit couplings without accommodating a keyway. Thermal operation is permitted from 0 to 40 °C, and insulation class 155 supports elevated winding temperature within normal motor limits. The power connector is located on the left side, which can simplify cable routing when the motor faces right-hand equipment. Because no holding brake is installed, any parked-axis retention must come from the drive or from an external mechanical device.