MSK100D-0200-NN-M1-RP0-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327068
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
29 Seconds
The Bosch Rexroth Indramat MSK100D-0200-NN-M1-RP0-NNNN is a standard IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features natural convection cooling, an optical multiturn absolute encoder with Hiperface interface, and provides IP65 protection. This servomotor has a shaft with keyway, supports a 0-40°C operating ambient temperature range, and comes without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100D-0200-NN-M1-RP0-NNNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. By converting drive inverter output into controlled rotary motion, the unit serves as the primary actuator on indexing tables, gantry axes, and forming presses. Its frame size 100 housing and D-length stator core provide a balance between torque density and installation depth, while the standard mechanical design allows direct flange mounting to existing gearboxes or couplings.
The motor removes heat to ambient air through natural convection, eliminating the need for external blowers or liquid circuits. Position feedback is delivered by a Hiperface interface that carries digital angle data and supply power over a single shielded cable. Inside the encoder, an optical disc generates 128 signal periods per revolution, and drive interpolation supports fine velocity control even at low speeds. Multi-turn tracking is handled by a battery-free gear stage that provides multi-turn absolute position over 4,096 turns. A molded stator enclosure and radial shaft seal provide IP65 protection against dust ingress and water jets encountered on production floors.
Mechanical power leaves the motor through a shaft with a keyway, enabling positive torque transmission to pulleys or couplings. Electrical energy enters on the right-hand side through a field-replaceable power connector, and winding code 0200 matches IndraDrive amplifiers that supply the required current range. The insulation system is rated to class 155, so continuous operation is permitted until winding temperature approaches 155 °C. Reliable performance is maintained within an ambient range of 0 to 40 °C, and operation outside this window requires derating or forced ventilation. The unit is supplied without a holding brake, so static load retention must be provided by external mechanics or the drive's torque-clamping function. The motor has a standard design with default bearing selection and housing tolerances for general-purpose automation.
Frequently Asked Questions about MSK100D-0200-NN-M1-RP0-NNNN:
Q: How is the MSK100D-0200-NN-M1-RP0-NNNN motor cooled?
A: The MSK100D-0200-NN-M1-RP0-NNNN uses natural convection for cooling, operating efficiently without external fans or forced cooling systems.
Q: What kind of encoder does the MSK100D-0200-NN-M1-RP0-NNNN motor use?
A: This model is equipped with a multiturn absolute optical encoder featuring Hiperface interface and 128 signal periods resolution.
Q: What shaft type is provided on the MSK100D-0200-NN-M1-RP0-NNNN servomotor?
A: A shaft with keyway is featured on this model, supporting secure mechanical coupling.
Q: What is the protection rating of the MSK100D-0200-NN-M1-RP0-NNNN motor?
A: The MSK100D-0200-NN-M1-RP0-NNNN servomotor holds an IP65 protection rating, ensuring it is dust tight and protected against water jets.
Q: Is the MSK100D-0200-NN-M1-RP0-NNNN motor equipped with a holding brake?
A: This model does not include a holding brake from the factory.
