Product Description:

The MSK100D-0200-NN-M1-LG2-NNNN servo motor is part of the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. It converts electrical power into regulated rotary motion for positioning axes, packaging machinery, and other automated equipment that require controlled speed and accurate shaft movement. In automated systems, it works with a servo drive to deliver controlled acceleration, stable running speed, and repeatable stopping behavior under changing load conditions. The motor uses a plain shaft for direct connection to couplings or gear stages. It also includes an electrically released holding brake to keep loads in position when drive power is removed.

The frame uses size code 100, and the housing depth corresponds to length class D, which gives the motor a larger active section for higher continuous torque. Winding code 0200 indicates the electrical characteristics used by compatible drive controllers. Position data come from an optical encoder with a Hiperface interface. It provides 128 signal periods per revolution and supports multiturn absolute feedback, so the drive can recover shaft position after a power cycle without a homing move. This feedback format also supports commutation and closed-loop position monitoring across the motor speed range.

The electrically released brake provides 70 Nm of holding torque for vertical axes or other loads that must remain stationary at standstill. The brake is intended to hold the axis at rest rather than to slow the motor during normal operation. Heat is removed by natural convection, so the installation should allow free airflow around the housing during continuous operation. Power and ground conductors terminate on a connector on the left side, which can simplify cable routing when the motor is mounted near moving machine elements.