Product Description:

The MSK100D-0200-NN-M1-AP2-NSNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. In automated machinery, it converts drive current into accurately regulated rotary motion for coordinated axes in packaging, handling, or machining cells. An internal feedback unit and an electrically released holding brake allow the drive to control position and secure the load whenever power is removed. This arrangement supports precise stopping and stable holding on axes that must remain in place between motion cycles.

Engine heat leaves the frame by natural convection, so no external blower is required. A housing rating of IP65 seals the motor against dust and water jets commonly encountered on production lines. The built-in brake supplies 70 Nm of static torque, helping vertical loads remain fixed during faults or shutdowns. Motion data are exchanged on the Hiperface link, and the encoder provides 128 signal periods from an optical scanning element for fine resolution. The laminated stator uses size 100 and length D, and winding code 0200 matches the electrical constants expected by compatible IndraDrive amplifiers. Power conductors connect on the A-side, which can simplify cable routing when the driven machine leaves more clearance near that end of the housing. Insulation class 155 allows elevated coil temperatures during continuous industrial service.

A multiturn absolute encoder retains shaft angle over power cycles, eliminating homing moves at startup when the axis mechanics preserve position. Continuous duty is permitted within 0–40 °C, which suits many enclosed machine spaces and general factory environments. Torque reaches the application through a shaft with keyway, allowing direct coupling to pulleys or gearboxes. The keyed output is useful where a positive mechanical connection is preferred over a smooth-shaft clamping arrangement.