Product Description:

The MSK100D-0200-NN-M1-AG0-NNNN is a servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It is installed on positioning and feed axes where precise torque control and rapid feedback are required to synchronize tooling, conveyors, or pick-and-place heads with machine cycles. In these applications, the motor converts drive commands into controlled rotary motion with a fast response to changes in load and speed. This supports accurate starts, stops, and repeatable axis movement in automated equipment.

Heat is removed by natural convection, so the housing relies on ambient airflow rather than forced ventilation. Position data is transferred through a Hiperface interface that works with an optical scanning system and provides 128 signal periods per mechanical revolution. The encoder stores angle information in a multi-turn absolute format, which allows position retention after power loss. Because the unit is supplied without a holding brake, external holding force is required if the axis must remain fixed during shutdown. The motor uses a standard mechanical design, a frame size of 100, and a length class of D for medium-power axis layouts. Its winding code 0200 identifies the electrical values used by matching IndraDrive inverters, and the plain shaft supports direct coupling to gearboxes or belt pulleys.

The motor has a protection rating of IP65, helping seal the stator winding and bearing zone against dust and low-pressure water jets. Continuous operation is permitted between 0-40 °C, which matches common machine and control cabinet environments. Thermal endurance corresponds to insulation class 155, allowing the windings to withstand higher internal temperatures before insulation aging accelerates. Power cabling is routed on the motor’s A-side, which helps separate the power connection from the feedback path and can simplify cable routing in compact machine assemblies.