Product Description:

The MSK100C-0450-NN-M1-LP0-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. In industrial automation, it acts as a rotary actuator that translates drive commands into controlled torque and position for coordinated motion in assembly cells, material-handling modules, and packaging lines. When paired with a compatible inverter, the motor supports dynamic acceleration profiles and accurate stopping points, helping equipment maintain cycle times and consistent motion control.

This unit relies on natural convection for cooling, so heat is removed through the housing without fans or liquid circuits. The enclosure carries an IP65 protection rating, which blocks dust ingress and low-pressure water jets, making cabinet installation or on-machine mounting practical. Position feedback is supplied through a Hiperface optical encoder that produces 128 signal periods per revolution, and the motor stores absolute shaft position across power cycles through its Multiturn Absolute capability. A standard mechanical build, combined with motor size 100 and length C, sets the frame envelope, while the left-side power connector helps simplify cable routing when the motor is installed alongside other axes.

The mechanical interface includes a shaft with a keyway for positive torque transmission to pulleys or couplings. The motor operates reliably in ambient temperatures from 0 to 40 °C, a range suited to controlled factory environments, and it uses insulation class 155 to tolerate elevated internal temperatures without degradation. Winding code 0450 identifies the electrical variant matched to compatible drive outputs. The assembly is supplied without a holding brake, so any static load must be secured by the drive or by an external locking device.