Product Description:

The MSK100C-0200-NN-S1-RP0-NNNN servomotor is produced by Bosch Rexroth Indramat and belongs to the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servomotor, it supplies closed-loop torque and position control for pick-and-place modules, packaging axes, and other automated stations. Its standard mechanical design matches the layout used across MSK motors. Integration of this motor into a drive chain provides the high precision required when positioning loads quickly during repetitive production cycles.

Its standard housing is sealed to IP65, allowing direct mounting outside control cabinets, while heat is removed by natural convection, so no external fan is necessary. The stator frame follows motor size 100, and the active length corresponds to code C for mid-range torque requirements. Electrical power enters on the right side of the stator through a plug-in connector, and winding code 0200 matches drives that can deliver the required current. Position feedback comes from a Hiperface interface that carries incremental and absolute data derived from an Optical scanning system set to 128 signal periods. This combination supports smooth velocity loops and precise synchronization between multiple axes without additional sensors.

The feedback device is Singleturn, so absolute position data is available within one mechanical revolution and suits applications that re-reference after each cycle. For holding functions, the motor is supplied without a holding brake, so external clamping or static torque from the drive must secure vertical loads. Mechanical output is delivered through a shaft with keyway for positive coupling to pulleys or couplings. The motor uses insulation class 155, and continuous operation is specified for ambient temperatures from 0 °C to 40 °C.