Product Description:

The MSK100C-0200-NN-S1-RG0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It operates as a rotary actuator for closed-loop positioning and speed control in industrial automation lines and other controlled machine systems, where it can couple directly to precision gear stages or machine shafts. Torque is generated by permanent-magnet excitation and electronically commutated windings, allowing fast response during acceleration, deceleration, and repeated indexing moves. This operating profile suits packaging machinery, printing presses, and material-handling axes that require consistent motion control over changing load conditions.

Cooling is handled by natural convection, so heat is dissipated through the housing without external fans or separate airflow hardware. Motion feedback is transmitted through a Hiperface interface, allowing the drive to exchange digital position and calibration data over two bidirectional conductors. The integrated sensor provides 128 signal periods, which gives the controller fine incremental resolution after interpolation by the connected drive. The motor uses length code C and frame size 100, which correspond to the mounting envelope and torque class for this design.

The feedback system uses optical scanning, which helps minimize signal drift over temperature and supports stable position detection during continuous operation. Because the encoder is single-turn, it tracks one mechanical revolution and is suitable for axes that return to a reference position at startup. The motor is supplied without a holding brake, so static load retention must be provided by the drive or by an external brake mechanism. Power conductors exit on the right side, which can simplify cable routing when several axes are mounted in a line. The shaft uses a plain ISO fit, and the 0200 winding code matches compatible drive current ratings for standard servo applications.