Product Description:

The MSK100C-0200-NN-S1-LG0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It delivers tightly regulated rotary torque for indexing tables, gantry axes, and other motion-controlled stations that rely on feedback-driven position loops. The motor is suited to applications that need repeatable motion, stable torque response, and accurate positioning in compact machine spaces. Frame size 100, length code C, and winding code 0200 establish the motor’s mechanical size and electrical setup for medium-inertia loads.

Thermal dissipation is handled by natural convection, so no external blower or liquid circuit is required, and the housing transfers heat directly to the surrounding air. Position data travel over the Hiperface interface from an optical encoder that resolves the shaft to 128 signal periods per revolution. Because the measuring system is single-turn, one absolute position is available within each full turn, which supports startup without an additional revolution count. The motor housing carries an IP65 rating that helps block dust ingress and water jets during normal industrial use. Standard geometry and Class 155 insulation materials support continuous operation when the winding temperature remains within the permitted range.

For applications that use external holding devices or drive-generated holding torque, the rotor is supplied without a holding brake. Power and feedback cabling enter from the left side, which can simplify routing when the drive is mounted on the opposite side of the axis. The motor uses a hardened plain shaft for direct coupling to gearboxes or pulleys without a keyed connection. Electrical and magnetic components remain stable at ambient temperatures from 0 to 40 °C. This layout supports clean mechanical alignment and straightforward cable routing in enclosed machinery and open machine frames.