MSK100C-0200-NN-S1-AP0-NSNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911377618
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
0 Seconds
The Bosch Rexroth Indramat MSK100C-0200-NN-S1-AP0-NSNN is part of the MSK IndraDyn S Synchronous Motors series and features natural convection cooling and a protection rating of IP65. It has a motor size of 100, a C motor length, and operates within an ambient temperature range of 0 to 40 degrees Celsius. This servomotor uses an optical Hiperface encoder with 128 signal periods and comes without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100C-0200-NN-S1-AP0-NSNN is an IndraDyn S synchronous servomotor built by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It provides closed-loop torque and position control for automated axes in packaging lines, printing presses, and material-handling stations where precise motion coordination is required. This motor integrates with Rexroth drive controllers through its designated feedback interface and supports reliable servo operation in industrial machinery.
The motor rejects heat through natural convection, so no external blower or liquid circuit is needed during continuous duty. Position feedback is transferred over the Hiperface digital link, which carries absolute position data and electronic motor data to the drive. The encoder generates 128 signal periods per mechanical revolution, and the optical scanning system interpolates them to a finer internal resolution. It uses optical sensing elements and operates as a single-turn device, reporting the absolute rotor angle for one revolution before repeating. The unit is supplied without a holding brake, so the load must be secured by drive torque or a mechanical lock when power is off. Size 100 with length C corresponds to the stator stack used for this torque range, and the power connector is positioned on the A-side to simplify cable routing where mounting space is limited.
The cast-aluminum housing carries an IP65 rating, which helps protect the windings from dust ingress and low-pressure water jets found on factory floors. Output torque is transferred through a shaft with a keyway, allowing rigid coupling to pulleys or gearboxes. The motor uses insulation class 155, which permits winding temperatures up to 155 °C before dielectric strength is compromised. Stator electrical characteristics follow winding code 0200, allowing the drive to match the motor's electrical values correctly. Rated operation is allowed in ambient temperatures from 0 °C to 40 °C, which suits enclosed machine areas and general production environments.
Frequently Asked Questions about MSK100C-0200-NN-S1-AP0-NSNN:
Q: How is the MSK100C-0200-NN-S1-AP0-NSNN motor cooled?
A: The MSK100C-0200-NN-S1-AP0-NSNN uses natural convection for cooling and does not require external fans.
Q: What kind of encoder is built into the MSK100C-0200-NN-S1-AP0-NSNN motor?
A: This model features an optical singleturn encoder with Hiperface interface and a resolution of 128 signal periods.
Q: What is the protection rating of the MSK100C-0200-NN-S1-AP0-NSNN servomotor?
A: The MSK100C-0200-NN-S1-AP0-NSNN is constructed with a protection rating of IP65.
Q: Is the MSK100C-0200-NN-S1-AP0-NSNN equipped with a holding brake?
A: This model comes without a holding brake.
Q: What type of shaft does the MSK100C-0200-NN-S1-AP0-NSNN have?
A: The shaft on this motor includes a keyway for secure mechanical coupling.
