MSK100C-0200-NN-S1-AG2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309667
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
10 Seconds
The Bosch Rexroth Indramat MSK100C-0200-NN-S1-AG2-NNNN is part of the MSK IndraDyn S Synchronous Motors series and is a standard design servomotor with motor size 100 and length C. It uses natural convection cooling, features a Hiperface optical encoder with 128 signal periods and singleturn technology, and has a plain shaft with an A-side power connector. The electrically-released holding brake provides a holding torque of 70 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100C-0200-NN-S1-AG2-NNNN is a servo motor engineered by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Built for closed-loop automation, it converts drive current from an IndraDrive amplifier into precise rotary motion for pick-and-place actuators, printing cylinders, and secondary packaging axes. High-resolution feedback integrated into the motor housing supports repeatable positioning over long operating periods. It is suited for applications that require precise acceleration control and consistent positioning from cycle to cycle. The standardized enclosure accepts plug-in power and signal connectors, which helps keep machine wiring organized and simplifies installation in compact servo axes.
The motor has a standard design and relies on natural convection to dissipate heat, which suits cabinets that do not use forced-air ducts. Its rotor and stator geometry correspond to size 100 with a C length active stack, giving the motor a frame suited to medium-duty automation tasks. The 0200 winding provides the electrical characteristics needed for balanced torque production on medium-inertia loads. An optical scanning head reads a single-turn encoder with 128 signal periods per mechanical revolution, providing absolute position data immediately after power-up. This feedback arrangement supports stable commutation and accurate position control during repeated starts, stops, and speed changes.
The drive-side connector is on the A-side, which helps align cable routing with other MSK motors in the same machine layout. Motion is transmitted through a plain shaft, which omits keys or serrations that can concentrate stress in high-cycle indexing tables. Position holding during downtime is provided by an electrically released brake rated at 70 Nm of static torque, so the shaft can remain secured when the axis is stopped. Feedback and drive communication use the Hiperface interface, so one hybrid cable carries incremental tracks, serial absolute data, and encoder supply power. This arrangement reduces the number of separate connections required at the motor housing.
Frequently Asked Questions about MSK100C-0200-NN-S1-AG2-NNNN:
Q: What cooling method is used on the MSK100C-0200-NN-S1-AG2-NNNN motor?
A: This MSK100C-0200-NN-S1-AG2-NNNN model features a natural convection cooling system that operates without additional fans or forced air.
Q: Does the MSK100C-0200-NN-S1-AG2-NNNN motor come with a holding brake?
A: A holding brake with 70 Nm of electrically-released torque is included for secure holding during system shutdowns.
Q: What type of encoder interface and technology does the MSK100C-0200-NN-S1-AG2-NNNN motor use?
A: The encoder interface utilizes Hiperface with optical technology, providing singleturn feedback and 128 signal periods resolution.
Q: What type of shaft does the MSK100C-0200-NN-S1-AG2-NNNN motor have?
A: This motor is provided with a plain shaft, facilitating direct coupling to equipment.
Q: On which side is the power connector located for the MSK100C-0200-NN-S1-AG2-NNNN motor?
A: The power connector for this model is positioned on the A-side of the motor.
