Product Description:

The MSK100C-0200-NN-S1-AG0-NSNN belongs to the MSK IndraDyn S Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is an IndraDyn S synchronous servomotor intended to deliver accurate torque and speed control for position-dependent axes in industrial automation environments. This makes it suitable for synchronized motion tasks that require repeatable positioning and stable speed regulation during operation. Connections exit on the A-side, which helps keep the power connector separated from the feedback plug in tight cabinet layouts.

This motor is cooled by natural convection, so heat is dissipated through its housing without fans or liquid lines. This cooling method avoids external air-moving hardware and eliminates the need for liquid connections. Feedback is handled through a Hiperface encoder interface that carries both position signals and electronic nameplate data to the drive. The optical sensor inside the encoder resolves the shaft into 128 signal periods, providing suitable resolution for mid-range precision tasks. An enclosure rating of IP65 prevents dust ingress and guards against low-pressure water jets, allowing installation on exposed machine frames. The unit maintains continuous ratings within an ambient range of 0–40 °C, so derating is not required in standard industrial environments. Its size code 100 and length code C indicate the frame dimensions, while winding code 0200 identifies the conductor layout matched to nominal current and voltage. A plain shaft transmits torque without keyways, which helps reduce tolerance buildup in precision couplings.

The motor is approved for Standard and Explosion Protection use, allowing installation in ordinary machinery as well as hazardous areas. It is supplied without a holding brake, so external clamping or drive-based braking must secure vertical loads during power-off. Encoder scanning uses an optical method that minimizes magnetic interference, and the encoder operates in a single-turn absolute format. That arrangement provides absolute position information within one mechanical revolution. Thermal endurance is rated at class 155, allowing winding temperatures up to 155 °C before insulation degrades.