MSK100C-0200-NN-M2-BP2-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336081
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
54 Seconds
The Bosch Rexroth Indramat MSK100C-0200-NN-M2-BP2-RNNN is an IndraDyn S Synchronous Servomotor in the MSK IndraDyn S Synchronous Motors series with a motor length C and size 100. It features natural convection cooling, an IP65 protection rating, and operates in ambient temperatures from 0 to 40°C. The servomotor uses an EnDat2.1 multiturn absolute optical encoder with 2048 signal periods and comes equipped with a 70 Nm electrically-released holding brake and a shaft with keyway.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK100C-0200-NN-M2-BP2-RNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It provides tightly regulated rotary motion for positioning and speed-controlled axes in automated production cells. As a synchronous servomotor, it is intended to operate with a matching drive that continuously corrects torque and velocity from feedback signals. Integrated feedback helps the drive maintain mechanical alignment and consistent motion during continuous cycling under changing loads.
Physical sizing follows motor size 100 and length code C. Heat from the stator windings is removed by natural convection, so no external coolant circuit is required. The housing meets IP65, allowing use in dusty or washdown areas when the installation is properly sealed. Power is routed through the B-side connector, which keeps the cable outlet on one side of the housing. The motor uses winding code 0200, and its increased concentricity helps reduce shaft runout during rotation. A keyed shaft fits standard transmission elements, and an electrically released holding brake provides 70 Nm of static torque for holding the load when power is removed. The insulation system is class 155 for continuous duty within the allowed ambient range.
Position data are generated by an optical, multi-turn absolute encoder. Communication takes place over the EnDat2.1 interface, which passes position information directly to the drive. With 2048 signal periods per revolution, the feedback system offers fine angular resolution, and its multi-turn memory preserves shaft position after a complete shutdown. The electronics, brake, and insulation remain thermally stable across an allowed ambient range of 0–40 °C. The motor is intended for operation in normal indoor industrial conditions within that range.
Frequently Asked Questions about MSK100C-0200-NN-M2-BP2-RNNN:
Q: What type and strength of holding brake does the MSK100C-0200-NN-M2-BP2-RNNN have?
A: This model is equipped with an electrically-released holding brake providing 70 Nm of braking torque.
Q: What type of encoder and interface are included on this motor?
A: The MSK100C-0200-NN-M2-BP2-RNNN uses a multiturn absolute optical encoder with EnDat2.1 interface, offering 2048 signal periods of resolution.
Q: How is the MSK100C-0200-NN-M2-BP2-RNNN motor cooled?
A: Cooling for this servomotor is achieved through natural convection, so no external fans or liquid cooling are required.
Q: What type of shaft configuration does the MSK100C-0200-NN-M2-BP2-RNNN have?
A: The motor features a shaft with keyway for secure mechanical connection to application loads.
Q: What protection rating does the MSK100C-0200-NN-M2-BP2-RNNN offer?
A: This servomotor carries an IP65 protection rating, ensuring it is dust-tight and protected against water jets.
