Product Description:

The MSK100C-0200-NN-M2-AP2-RNNN synchronous motor is produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. This brushless servo unit is intended to work with IndraDrive controllers so that motion axes receive tightly regulated torque and velocity. Compact stator laminations, standardized connectors, and integrated feedback circuitry allow the motor to mount directly on machinery without additional adapters. Its typical role is to actuate conveyor sections, gantry axes, or rotary tables that require repeatable positioning accuracy in automated plants.

Heat is dissipated by natural convection, so enclosure fins transfer loss power to the surrounding air without external fans or coolant lines. Position feedback is delivered through an EnDat2.1 serial interface that sends incremental and absolute data to the drive. The optical scale inside the encoder provides 2048 signal periods per mechanical revolution, giving fine angle resolution for tight speed loops. The motor has frame size 100, which corresponds to a mid-range housing in the IndraDyn portfolio. Its electromagnetic behavior is determined by winding code 0200, which sets the nominal voltage constant and permissible continuous current.

Load securing during standstill is provided by an electrically released brake with a holding torque of 70 Nm, preventing shaft movement when the drive is de-energized. Power is transferred through a shaft with keyway, giving a positive mechanical interface for pulleys or couplings. The electromagnetic stack uses motor length C, adding active material for higher continuous torque while keeping the same frame size. Multi-revolution tracking is available through the multiturn absolute encoder format, so axis position is retained across power cycles and is available again when the controller restarts.