Product Description:

The MSK100C-0200-NN-M2-AG2-RNNN is a synchronous servo motor from the MSK IndraDyn S Synchronous Motors series manufactured by Bosch Rexroth Indramat. Installed in closed-loop drive systems, it converts electrical power into accurately metered rotary motion so automated equipment can position tooling, feed material, or track line speed with tight tolerance. It is suited for servo axes that require repeatable speed control, responsive acceleration, and stable position feedback during continuous machine cycles. In automated lines, this type of motor is commonly used on feed axes, handling units, and positioning stations where motion accuracy affects product quality. The C housing length gives the motor a compact package, and the size-100 stator core is not offered in length A.

Position data are generated by an encoder with EnDat2.1 communication and 2048 signal periods of resolution. Its multi-turn absolute design preserves shaft angle across power cycles, and the optical scanning principle supports increased concentricity for low runout at the plain shaft. This feedback arrangement lets the connected drive read rotor position immediately after startup and maintain accurate commutation during motion. Because the encoder is absolute, the system can retain position information after shutdown instead of relying only on incremental counting. Thermal energy leaves the stator by natural convection, while an electrically released brake provides 70 Nm of holding torque when power is removed. The A-side power connector keeps cable routing directed along the machine frame.

The housing has IP65 protection, so dust and water jets are kept away from internal components during operation within an ambient range of 0–40 °C. Thermal endurance is rated at class 155, permitting winding temperatures up to 155 °C without insulation breakdown under the intended operating conditions. The motor uses winding code 0200, which corresponds to the electrical characteristics expected by compatible drive controllers. The sealed housing helps protect windings and internal mechanical parts in areas exposed to airborne dust or occasional spray. This combination is suitable for enclosed machine installations where stable insulation performance and protected internal parts are important during routine production.