MSK100C-0200-NN-M2-AG0-RSNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911340658
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK100C-0200-NN-M2-AG0-RSNN synchronous servomotor introduced by Bosch Rexroth has an Ex-design along with increased concentricity and run-out. This servomotor depicts a maximum operating temperature of 55 °C. It is not meant to be operated at an altitude higher than 3000 m. The motor comprises an encoder with a supply voltage of 3.6 Vcc to 14 Vcc.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth strives to set a precedent for quality and innovation with a broad product portfolio that comprises synchronous motors, spindle motors, ironless linear motors, drive controllers, frequency converters, drive converters, power supply modules, brake choppers, and inverter modules.
The MSK100C-0200-NN-M2-AG0-RSNN model is comprised of four polar pairs and a thermal time constant of 90 minutes, which corresponds to the time required for the motor to cool down naturally. The maximum torque produced by the model is 148 Nm, and its moment of inertia is 0.02730 kgm2. The model must be transported between -20 and +80 degrees Celsius and installed and operated by a skilled technician. The MSK100C synchronous motor has a voltage constant of 145.5 V/min-1 and winding resistance of 0.46 ohms. The maximum speed of the motor is 3500 revolutions per minute, while the maximum current consumption is 79.7 A. The model has a simple plain output shaft and an A-side power connection. The motor produces 38 Nm of constant torque and uses 17.7 A of continuous current at 60K. The model may only be used as intended. Personal harm or property damage may result from improper use. The MSK100C synchronous motor features IP65 dust and water protection certification and insulation class 155.
The model MSK100C-0200-NN-M2-AG0-RSNN has an absolute EnDat2.1 multiturn encoder and 6.700 mH of winding inductance. The model weighs 45.1 kg (without any attachments) and has a torque constant of 2.37 Nm/A. (20 degree centigrade). Strong oscillations have been observed to reduce motor efficiency; thus, the motor must be installed with care and operated between 0 and +40 degrees Celsius. Wake Industrial provides a one-year replacement warranty on this synchronous motor (MSK100C-0200-NN-M2-AG0-RSNN).
