Product Description:

The MSK100C-0200-NN-M1-LP0-NNNN is an IndraDyn S synchronous servomotor manufactured by Bosch Rexroth Indramat and included in the MSK IndraDyn S Synchronous Motors series. It is intended for closed-loop motion axes where high positional repeatability, compact dimensions, and straightforward cabinet wiring are required in industrial automation lines. Its synchronous design supports precise speed and position control when paired with a compatible servo drive in automated equipment. The unit ships without a holding brake, so load-side restraint must be provided externally when power is off.

Heat from the stator is removed by natural convection, so no external fan or coolant lines are needed and installation space is minimized. Position feedback is exchanged through the Hiperface digital interface, allowing the motor to connect directly with compatible drive controllers. The internal encoder resolves the shaft angle into 128 signal periods, and the optical scanning method supports precise, low-jitter speed control. Because the encoder is a multiturn absolute type, it reports shaft position across multiple revolutions without battery backup, which simplifies startup after power cycles. An enclosure rating of IP65 helps protect the housing against dust ingress and water jets in contaminated machine environments.

A shaft with keyway transmits torque to pulleys or couplings while helping prevent rotational slip under load. The specified ambient operating window spans 0 to 40 °C, matching many plant floor conditions and aligning with the motor’s thermal class 155 insulation during normal operation. Winding code 0200 indicates the electrical layout, including the current ratings and back-EMF characteristics used by the matching drive. The motor also has a standard mechanical design, motor length C, frame size 100, and a left-side power connector that routes cables away from moving structures.