Product Description:

Bosch Rexroth Indramat manufactures the MSK100C-0200-NN-M1-AG2-NSNN servo motor in the MSK IndraDyn S Synchronous Motors series. This AC synchronous unit provides closed-loop torque and position control for automated axes, conveyors, and pick-and-place modules in industrial automation. When used with IndraDrive controllers, it converts digital commands into precise rotary motion for packaging, printing, and material-handling lines that require repeatable accuracy and rapid duty cycles. Its synchronous design supports repeatable motion where the drive must control acceleration, dwell, and stop positions with minimal deviation.

Internally, winding code 0200 identifies the electrical winding used for this motor. The electrically released holding brake provides 70 Nm of static torque so suspended or vertical loads can remain held when power is removed. An enclosure rating of IP65 helps protect the housing against dust ingress and water jets, allowing installation outside a sealed cabinet. Position feedback is delivered by an optical encoder that outputs 128 signal periods per mechanical turn, and the controller uses that feedback for accurate commutation and position tracking. This feedback arrangement lets the drive maintain stable control during start-stop motion and speed changes. Continuous service is supported within an ambient range of 0 to 40 °C, which suits normal industrial indoor conditions.

The motor uses frame size 100 with length C. Heat is removed through natural convection, so no external fan or liquid circuit is required. Power enters through the A-side connector, and a plain shaft supports direct coupling to gearheads or timing pulleys. The A-side connection can simplify cable routing when the machine layout places the drive or cable track near that end of the motor. Encoder data and supply lines use the Hiperface interface for communication with the control system. The insulation system is rated to class 155, which supports reliable operation under normal thermal loading.