Product Description:

The MSK100B-0450-NN-M1-RP0-NNNN is a synchronous servo motor built by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. Classified as a servo motor in the IndraDyn S family, it works with IndraDrive controllers to generate controlled torque and speed for packaging lines, robotic joints, and material-handling axes. The motor uses a standard mechanical design that fits installations where high dynamic response and a compact footprint are required in industrial automation.

It relies on natural convection for heat removal, so allowable continuous load depends on ambient airflow rather than a dedicated fan. Winding code 0450 identifies the stator's electrical characteristics, and the 100 frame with a B length uses a magnetic stack that balances inertia with torque density. A right-side power connector supports orderly cable routing inside machine enclosures. Feedback is provided through the Hiperface interface, and the optical reader scans 128 signal periods per mechanical turn. Because the scanning principle is optical, position data remain stable against electrical noise. The encoder is a multiturn absolute device, so the controller receives exact shaft position data even after power loss without a homing move.

The enclosure carries an IP65 rating, sealing the stator against dust ingress and low-pressure water jets in typical machine environments across the permitted temperature span of 0–40 °C. Torque is transferred through a shaft with a keyway, which supports connection to pulleys or gear sets. Consistent with its standard design, the insulation system is class 155 for continuous winding temperatures up to 155 °C. The motor is delivered without a holding brake, so external mechanics or drive torque must secure a stopped axis when supply power is removed.