MSK100B-0300-NN-S2-BG1-RNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911312318
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK100B-0300-NN-S2-BG1-RNNN synchronous servomotor produced by Bosch Rexroth can be used only for industrial applications. This servomotor portrays a voltage constant of 108.5 V/min at 20 °C. It withstands a maximum axial shock load of 100 m/s2 for 11 ms. The motor features 2,048 signal periods for its encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch MSK100B-0300-NN-S2-BG1-RNNN is a servo motor. It belongs to the MSK product line. MSK motors are synchronous servo motors that support a range of optional features. Operators can order features that match their requirements. The housing of the MSK100B-0300-NN-S2-BG1-RNNN motor features a design with increased concentricity and run out. The housing is sealed. In addition, the connectors for the power and feedback cables are also sealed. As a result, the motor complies with ingress protection of the IP65 protection category. Devices with this protection category are safe from dust ingress. Devices with IP65 protection rating are also safe from water directed at them from low-pressure jets. The motor is equipped with an electrically-releasing holding brake. The holding torque rating of the brake is 32 Nm. The current and voltage ratings of the brake are 0.93 Amps and 24 Volts DC.
The MSK100B-0300-NN-S2-BG1-RNNN motor is equipped with an optical singleturn encoder rated for 2048 signal periods. The accuracy of the encoder is ±20 angular seconds. The maximum encoder speed is 15000 RPM. Maximum current consumption of the encoder is 150 milliamps and the supply voltage range is 3.6 to 14 Volts DC. The MSK100B-0300-NN-S2-BG1-RNNN motor is a convection cooled motor. However for higher loads operators can use the motor with surface cooling. Fan units for axial and radial mounting are available for applications with increased continuous performance. The motor has a smooth shaft with a seal. The function of the seal is to protect motor bearings from wear and tear. The seal is made of a material that degrades during operation, and should therefore be replaced on a periodic basis. The motor power socket is located on side B of the housing.
