Product Description:

The MSK100B-0300-NN-S1-AP2-NNNN servomotor is manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servomotor, it converts drive commands into controlled rotary motion for packaging lines, pick-and-place modules, and other closed-loop automation axes. The motor integrates permanent-magnet excitation with high-resolution feedback so the associated drive can regulate torque and position precisely, while an axial plug connection simplifies cabinet wiring. This layout supports repeatable acceleration and steady positioning in applications that cycle frequently throughout normal production.

The motor is built in a standard housing that relies on natural convection for cooling, so no blower or liquid circuit is required. Its mechanical code lists length B, which provides a balanced housing size for continuous industrial motion. Position feedback is issued over a Hiperface link. An internal optical sensor tracks 128 signal periods each turn, and the feedback operates in a single-turn format, providing absolute rotor angle within one revolution. This arrangement supports precise commutation at low speed and allows digital diagnostic data to travel through the same cable as the feedback signals.

A permanently mounted holding brake, released electrically, supplies 70 Nm of static torque to secure vertical axes during downtime. Output power is transmitted through a shaft with keyway, allowing positive locking to pulleys or couplings without additional machining. The frame corresponds to a 100 size stator, and the electromagnetic circuit follows winding code 0300, which sets resistance and inductance for compatible IndraDrive inverters. The housing carries the power plug on the A-side, which helps keep cable routing orderly in multi-axis assemblies. This arrangement supports clean separation between power and feedback paths and reduces the need for additional interface hardware.