Product Description:

The MSK100B-0200-NN-S1-RP0-NSNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It is intended for closed-loop torque and speed control in automated machinery, pick-and-place axes, and packaging lines where accurate motion is required. Its size 100 frame and B-length stator place it in the mid-torque range of the product line, making it suitable for applications that need precise feedback and steady continuous output. That operating profile also suits axes that must start, stop, and reverse with controlled accuracy during repeated production cycles.

The unit uses natural convection, so heat leaves through the housing without auxiliary fans or liquid circuits. Position data are transmitted over a Hiperface interface, which allows the drive to receive motor feedback through a hybrid cable connection. Inside the encoder, an optical disc produces 128 signal periods per mechanical revolution, and the optical sensing method supports stable signal quality during closed-loop operation. Because the encoder is a single-turn model, it reports the absolute shaft angle within one mechanical rotation.

The motor is supplied without a holding brake, so any load that must remain fixed after power is removed requires external holding force. Its aluminum housing has an IP65 rating that helps protect internal parts from dust and low-pressure water jets in typical factory settings. Torque is transmitted through a shaft with a keyway, which provides a secure coupling point for pulleys or gearboxes, and the right-side power connector can simplify cable routing in parallel machine layouts. Continuous operation is permitted at ambient temperatures from 0 to 40 °C, and the Class 155 insulation system supports the 0200 winding under those conditions.