Product Description:

The MSK100B-0200-NN-S1-RG0-NNNN belongs to the MSK IndraDyn S Synchronous Motors series from Bosch Rexroth Indramat. As an IndraDyn S synchronous servomotor, it delivers precise torque and position control for automated machinery, packaging lines, and axis drives that rely on high-resolution feedback during repetitive motion tasks. The motor integrates an optical encoder and is built for installation in environments where sealed housings and compact wiring layouts are desired, especially when available mounting space is limited.

The housing is cooled by natural convection, so heat is removed through surface radiation and airflow from the motor housing without external fans, simplifying maintenance and reducing noise. A protection rating of IP65 keeps dust and water jets from reaching the internal stator and encoder assemblies, supporting installation on open machine frames. Continuous operation is permitted between 0 to 40 °C, which suits many standard industrial surroundings. The power connector is mounted on the right side, allowing cable routing along the machine baseplate instead of across the rear face. Mechanical power is delivered through a plain shaft, which supports clamp or shrink couplings and helps provide smooth torque transfer.

Position data are transmitted through a Hiperface interface, and the optical reader resolves the code disc into 128 signal periods per rotation for fine speed loops. Because the track is single-turn, absolute position is retained within one revolution, while multi-turn counting is handled in the drive. The motor frame uses size code 100 and length B to balance torque density with envelope constraints, and winding code 0200 matches the electrical characteristics expected by compatible IndraDrive controllers. The motor uses class 155 insulation, allowing winding temperatures up to 155 °C during cyclic peaks. The standard design is supplied without a holding brake, so static load retention must be provided externally when required.