Product Description:

The MSK100B-0200-NN-S1-BP2-NNNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. In industrial automation, this motor works with IndraDrive control hardware to generate accurate rotary torque and position feedback for packaging axes, handling gantries, and other servo-controlled stations. The combination of servo torque production and integrated feedback allows the connected drive to regulate speed and position in a closed loop during indexing, transfer, and other coordinated machine movements.

Electromagnetic behavior is set by winding code 0200, while excess heat is removed through natural convection, eliminating the need for fans or liquid cooling lines. Its optical single-turn encoder communicates over the Hiperface interface and delivers 128 signal periods per revolution, allowing tight velocity loops and absolute position availability after power-up. A spring-applied, electrically released brake supplies 70 Nm of static holding torque so vertical or suspended loads remain fixed when the drive is de-energized. Mechanical power and feedback cabling exit on the B-side, and the keyed shaft transfers torque to couplings or pulleys. The motor is supplied in the standard version for this series.

For enclosure planning, the housing carries an IP65 rating that blocks dust ingress and resists water jets. Continuous operation is permitted at ambient temperatures from 0–40 °C, and operation within this range helps avoid thermal derating. The active magnetic stack belongs to motor size 100, which provides a balance between torque density and inertia for medium-frame machinery. Insulation system class 155 supports winding temperatures up to 155 °C before insulation life is reduced. These operating limits suit enclosed production equipment that is exposed to airborne particles, routine cleaning, and normal temperature variation.