Product Description:

The MSK100B-0200-NN-S1-AP2-NNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It is intended for integration into closed-loop industrial drive systems where precise rotary motion is required to position tooling, index conveyors, or synchronize print cylinders. The motor’s compact construction supports direct coupling to the load, which reduces mechanical compliance and improves positional repeatability in automated assembly cells, palletizing equipment, packaging systems, and other motion-focused machinery where responsive axis control is required.

This model relies on natural convection cooling, so heat is dissipated through the housing without forced airflow. Internal windings use code 0200, and the motor is built in size 100 with length B. The standard design designation indicates a standard finish, and the power connector is placed on the A-side for straightforward cable routing. Feedback is supplied by an optical encoder that communicates over the Hiperface interface, delivers 128 signal periods per revolution, and operates as a single-turn device for absolute position within one mechanical turn. For load-holding tasks, an electrically released brake provides up to 70 Nm of static torque to help prevent shaft movement when the drive is disabled.

An enclosure rating of IP65 allows installation in dusty or splash-prone areas when the mating connectors are sealed correctly. This level of protection helps keep contaminants away from internal components during normal industrial use. Continuous operation is permitted within an ambient range of 0 to 40 °C, which matches typical industrial cabinet conditions. Power is transmitted through a shaft with keyway, which supports secure torque transfer to couplings or pulleys. The windings use insulation class 155, which sets the thermal limit for the conductor system during sustained duty.