Product Description:

The MSK100B-0200-NN-S1-AP0-NSNN is a synchronous servo motor from Bosch Rexroth Indramat in the MSK IndraDyn S Synchronous Motors series. Designed for closed-loop industrial drive systems, it converts electrical energy into controlled rotary motion for positioning tasks on packaging lines, transfer stations, and CNC axes. Its feedback and mechanical layout support tight speed and torque regulation when paired with an IndraDrive controller. This makes the motor suitable for axes that must start, stop, reverse, and hold commanded position with repeatable response during normal production cycles. It is intended for applications where the drive must coordinate motion accurately with upstream control commands and changing load conditions.

Heat produced by the stator is released through natural convection, so external fans or liquid circuits are unnecessary under rated loading. A die-cast housing sealed to IP65 keeps dust and low-pressure water jets away from the windings, which is useful in washdown areas. The Hiperface interface works with a 128-period optical encoder, and the feedback track supplies single-turn absolute position data directly to the drive for immediate position reference after power-up. Class 155 insulation supports the winding temperature range used for this motor. The shaft includes a keyway for positive torque transfer, and the motor is delivered without a holding brake, so external braking or mechanical locking is required when the axis must remain fixed.

The physical format follows the MSK sizing scheme: frame 100 provides a mounting pattern compatible with common ISO flange arrangements, and the medium B length gives a balance between torque density and inertia for rapidly cycling axes. The stator winding identified by code 0200 is matched to IndraDrive current ranges so the motor can deliver continuous torque without requiring an oversized inverter. Operation is intended for ambient temperatures from 0–40 °C, which fits standard machine enclosures and typical factory conditions. The power connector is mounted on the A-side, which can simplify cable routing when surrounding machine components limit access.