Product Description:

The MSK100B-0200-NN-S1-AP0-NNNN is a synchronous servomotor built by Bosch Rexroth Indramat and supplied within the MSK IndraDyn S Synchronous Motors series. It is intended for closed-loop motion axes where high positional accuracy and smooth speed control are needed in packaging machines, printing lines, and material-handling gantries. By integrating with IndraDrive controllers, the motor converts electrical power into rotary motion with low torque ripple, supporting precise automation tasks.

It features cooling by natural convection, so heat is removed through the housing surface without forced airflow, simplifying cabinet design. The frame size is 100, which sets the mounting dimensions and shaft height, while the stack length code B extends the active iron to increase torque capability within the same flange. The 0200 winding code matches the motor to compatible drive inverters through its resistance and inductance values for current control. Power leads exit on the A-side, allowing the cable trunk to follow a single routing pattern along the machine frame and helping reduce interference with adjacent modules.

Position feedback relies on the Hiperface digital interface, enabling absolute position transmission through a single hybrid cable. The encoder uses optical scanning to detect rotor angle and maintains a single-turn memory structure, which provides one revolution of absolute data before repeating. Within each revolution, the system divides motion into 128 signal periods, giving fine interpolation potential for the drive controller. Because the motor is supplied without a holding brake, external mechanisms or drive torque must secure a static load during power-off states. A shaft with a keyway transmits torque directly to couplings or pulleys without relying on press fits, which helps maintain axial alignment.