Product Description:

The MSK100B-0200-NN-S1-AG1-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servo motor, it converts controlled electrical input from a drive into precise rotary motion for axes that demand accurate speed and position regulation. The motor follows the manufacturer’s standard design profile and is delivered with a plain shaft that simplifies direct coupling to load elements. It serves in automated packaging, material-handling, and processing equipment where rapid, repeatable movement is critical.

Thermal management relies on natural convection, meaning heat is released through the housing surface without forced airflow, so cabinet ventilation planning must respect the ambient limit set by the drive system. Position feedback is handled through the Hiperface serial interface, which provides both absolute position data and motor nameplate information to the controller. An integrated encoder with 128 signal periods per revolution measures rotor position, and its optical sensing principle offers high signal fidelity that supports smooth torque production at low speeds. These features allow accurate closed-loop operation without auxiliary temperature or speed transducers.

The feedback device is a single-turn unit, so absolute position is retained for one mechanical revolution, which simplifies homing procedures on power-up. Motion is secured during power-off by an electrically released holding brake that applies 32 Nm of static torque to the shaft. The housing corresponds to frame size 100, providing a balance between continuous torque capability and installation footprint. Power and feedback cabling exit on the motor’s A-side, easing routing inside tight machine frames. Electrically, winding code 0200 identifies the stator copper cross-section and turns count, allowing the connected drive to calculate correct current limits for this model.

View Datasheet