Product Description:

The MSK100B-0200-NN-M3-BG0-NNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It converts electrical drive commands into precisely regulated torque and speed for positioning tables, pick-and-place modules, and articulated robot axes in industrial automation. Closed-loop operation lets the connected drive maintain accurate motion during repeated starts, stops, and direction changes. Its compact servo format makes it suitable for axes that need high response, repeatable positioning, and coordinated motion with other driven components.

Heat is removed through natural convection, so no external blower is required. The housing is sealed to IP65, which helps protect internal parts from dust and water jets in typical industrial areas. Rotor position is delivered to the drive over a Hiperface interface, and the feedback sensor uses capacitive measurement to resist electromagnetic interference common near welding equipment and other high-current machinery. Mechanical power exits on a plain shaft, allowing direct coupling with suitable clamping hubs. The motor has frame size 100 with length B, winding code 0200, standard mechanical design, and a B-side power connector that routes cabling away from the load side. The motor is supplied without a holding brake, so any static load must be held by the machine or by drive torque.

Within the feedback system, resolution equals 16 signal periods per electrical revolution. The encoder stores position over multiple turns with a multiturn absolute count, so homing is not required after power is restored. Continuous operation is supported in ambient temperatures from 0 to 40 °C, and the insulation system is rated to Class 155, permitting elevated winding temperatures before thermal derating. Known shaft position remains available after planned shutdowns or brief power interruptions, which reduces the need for a return-to-home sequence on restart.