Product Description:

The MSK100B-0200-NN-M1-AG1-NNNN is a synchronous servo motor developed by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Installed in CNC machining centers, material-handling robots, and high-speed packaging axes, the motor converts drive current into accurately regulated torque and speed for closed-loop motion tasks that require high positional accuracy. It works with compatible drive controllers to support coordinated axis movement across automated production lines. In these systems, the motor can be used for indexing, contouring, and point-to-point positioning where the commanded path must remain consistent under changing load.

Thermal management relies on natural convection, so the aluminum housing dissipates heat without external fans or liquid circuits. The motor has frame size 100 and length code B, which gives it an active iron length suited to midsize gantry axes. A Hiperface feedback interface carries position data from the optical sensor to the drive, and the read head resolves 128 signal periods per mechanical revolution while the multiturn mechanism stores absolute position across power cycles. This feedback arrangement supports immediate position reference after power restoration. Mechanical output is delivered through a plain shaft that accepts keyed or clamp couplings and avoids the additional inertia of integrated gearing. The 0200 winding code is intended for use with mainstream 400 V class inverters.

The integrated brake provides 32 Nm of holding torque and is electrically released, allowing secure vertical-axis parking when the controller is disabled. Power is supplied through an A-side angled connector, which helps route cables where space behind the motor is limited. The connector orientation can also reduce cable bend stress in compact machine layouts. The motor uses a standard design, so the mounting dimensions remain compatible with standard accessories. Shaft sealing and balancing are intended for general-purpose duty cycles.